Buying Ac?

As with anything, when you are buying something as expensive (and life changing) as central air conditioning, you want to be sure that you are getting what you pay for and getting equipment that actually works. Where to start? Well, consumer reports prides themselves with providing consumers with an excellent base of information in various fields. One of those fields, is air conditioning. Here are somethings that you might want to know before settling in on that new air conditioner.

Source: http://www.consumerreports.org/cro/appliances/heating-cooling-and-air/air-conditioners/air-conditioner-buying-advice/central-air/index.htm last access 9/14/09.

Learn the lingo

Design

In a "split system," the typical design, refrigerant circulates between an indoor coil and a matching outdoor condenser with compressor. The refrigerant cools the air, dehumidifying it in the process; a blower circulates air through ducts throughout the house. A variation is the "heat pump," a type of system that functions as heater and cooler. When used as an air conditioner, a heat pump discharges heat from the house either into the air or deep into the ground. In the winter, a heat pump extracts heat from the ground or the air to warm the house.

Efficiency

This describes how much cooling the unit delivers for each watt of electricity. Efficiency is expressed as the Seasonal Energy Efficiency Rating, or SEER. At present, a SEER of 10 denotes a low-efficiency unit; medium efficiency is 11 to 14; high efficiency is above 14. New federal regulations that took effect in 2006 set the minimum SEER for a central air conditioner at 13.

Size

A synonym for the air conditioner's cooling capacity, size is measured in British thermal units per hour (Btu/hr.) or in "tons." One ton of cooling equals 12,000 Btu/hr.

Get the right contractor

Finding a trustworthy contractor to install and service an air-conditioning system matters the most. Here's how to choose:

Ask around

Seek referrals from neighbors, family, or business associates. It's wise to get price quotes from at least three contractors.

Check the background

Contractors who bid on your installation should show you proof of bonding and insurance, plus any required contractor's licenses. Check with your local Better Business Bureau and consumer affairs office for complaint records. It's a plus if technicians are certified by a trade organization, such as North American Technician Excellence or HVAC Excellence, to service residential heating and cooling equipment. These and other similar programs assess the technician's knowledge of specific types of equipment and its proper service methods. We believe that a contractor who has made the effort to get certified and has practiced this trade and learned from several years of service and installation experience, will be a better service provider.

Get specifics

Contractors who bid on your job should calculate required cooling capacity by using a recognized method like the Air Conditioning Contractors of America's Residential Load Calculation Manual, also called Manual J. An additional reference for assessing ductwork needs is Manual D. The calculations produce a detailed room-by-room analysis of cooling needs. Ask for a printout of all calculations and assumptions, including ductwork design. Be leery of a contractor who bases estimates merely on house size or vague rules of thumb.

Expect maintenance

A service plan that combines regular inspections with discounts on repairs and a labor warranty is worth negotiating into the overall price. Prices for such service vary widely.

At a minimum, regular inspections should include these steps:

• Check for and repair refrigerant leaks.
• Detect and correct duct leaks.
• Inspect and tighten the electrical connections, checking for damage.
• Clean the coils, drain pan, and drainage system.
• Vacuum the blower compartment.
• Replace filter monthly or as recommended by the manufacturer.

Choose the right unit

If you're replacing an old central-air system, you can expect to pay around $3,000 for the equipment. If you need ductwork installed because you're starting completely from scratch or are upgrading a forced-air heating system, expect to pay $6,000 or more. Improving the system's air-filtration capabilities is also easiest to do as part of a general upgrade.

Brand plays some role in the selection.

Here are other factors that may affect reliability:

• Matching new equipment with old. If you replace only the condenser, you have a "field-matched" system that can be less efficient than advertised and that may require more repairs because of undetected incompatibilities between the two.
• Damper-zoned cooling. A large or multistory house is often divided into several heating and cooling zones to improve temperature control. However, this type of system is complex and has many more moving parts and controls and so may require more repairs.

These are just some suggestions about how to choose the best possible unit for your situation. When talking to an air conditioning professional, it is important to ask any questions you have and make sure that your questions are answered in ways that you understand. This also applies for service. If your air conditioner breaks down, it is important to know what the contractor is going to do to fix it as well as their pricing ahead of time.

Please also make sure that you are dealing with a REGISTERED contractor in GOOD standing!!